WHAT IS THE AIM OF THE REGULATION?
Regulation (EU) 2019/1782 establishes ecodesign1 requirements for the placing on the market or the putting into service of external power supplies2.
KEY POINTS
- The regulation does not apply to:
- voltage converters;
- uninterruptible power supplies;
- battery chargers without a power supply function;
- lighting converters;
- external power supplies for medical devices;
- active power-over-Ethernet injectors;
- docking stations for autonomous appliances;
- external power supplies placed on the market before 1 April 2025 solely as service parts or spare parts for replacing identical external power supplies placed on the market before 1 April 2020.
- The ecodesign requirements are set out Annex II.
- The regulation sets out the conformity assessment procedure, and in Annex II, point 3, the measurement method and calculations that must be used.
- National authorities must apply the verification procedures laid down in Annex III when carrying out market surveillance checks.
- Annex IV sets out indicative benchmarks for the best-performing products and technologies available on the market.
Repeal and replacement
The regulation is repealed by Commission Regulation (EU) 2025/2052 (see summary) with effect from 14 December 2028:
- from that date, Regulation (EU) 2019/1782 no longer applies to external power supplies placed on the market or put into service;
- Regulation (EU) 2025/2052 amends the ecodesign requirements for external power supplies, introducing updated requirements, including extended scope, interoperability rules and new information obligations;
- transitional provisions allow certain spare-part external power supplies to continue to comply with the requirements of Regulation (EU) 2019/1782 for a limited period after repeal, under specific conditions.
FROM WHEN DOES THE REGULATION APPLY?
It has applied since 1 April 2020 and repealed Regulation (EC) No 278/2009 on that date.
BACKGROUND
Directive 2009/125/EC establishes a framework to set ecodesign requirements for energy-related products. The European Commission must set these for products which are widely sold and traded in the EU and have a significant environmental impact.
For more information, see:
KEY TERMS
- Ecodesign. Policy to improve, through better design, products’ environmental performance throughout their life cycle, especially their energy efficiency.
- External power supply. A device that converts single-phase alternating current from the mains into one or more alternating or direct current outputs and is contained in a separate enclosure from the powered product.
MAIN DOCUMENT
Commission Regulation (EU) 2019/1782 of 1 October 2019 laying down ecodesign requirements for external power supplies pursuant to Directive 2009/125/EC of the European Parliament and of the Council and repealing Commission Regulation (EC) No 278/2009 (OJ L 272, 25.10.2019, pp. 95–106).
RELATED DOCUMENTS
Regulation (EU) 2025/2052 laying down ecodesign requirements for external power supplies, wireless chargers, wireless charging pads, battery chargers for portable batteries of general use and USB Type-C cables.
Directive 2009/125/EC establishing a framework for the setting of ecodesign requirements for energy-related products.
Successive amendments to Directive 2009/125/EC have been incorporated into the original text. This consolidated version is of documentary value only.