WHAT IS THE AIM OF THE REGULATION?
Regulation (EU) 2025/2052 lays down ecodesign requirements for placing on the market and putting into service external power supplies (EPS) and certain charging equipment to improve energy efficiency, interoperability and environmental performance across the European Union (EU), through:
- minimum energy efficiency requirements for EPS;
- limits on standby power consumption for wireless charging equipment;
- interoperability requirements based on USB Type-C and USB Power Delivery;
- information and marking requirements to support consumers’ choice and reuse of chargers.
KEY POINTS
Scope and products covered
The regulation establishes ecodesign requirements for a wide range of charging and power conversion products placed on the EU market.
- It applies to:
- EPS;
- battery chargers for portable batteries of general use (e.g. AA or AAA);
- wireless chargers and wireless charging pads;
- USB Type-C cables.
- It applies to products placed on the market either on their own or together with the powered consumer product.
- It does not apply to, among other things:
- uninterruptible power supplies;
- separate control gears (EPS) used with lighting applications;
- EPS designed exclusively for medical devices;
- EPS used exclusively with means of transport;
- docking stations for autonomous appliances.
Energy efficiency and power consumption requirements
The regulation sets mandatory, more stringent efficiency requirements for EPS to reduce energy losses during use.
- It sets:
- minimum average active efficiency requirements;
- minimum low-load efficiency requirements (at 10 % load);
- maximum no-load power consumption limits.
- Requirements vary according to:
- output power levels;
- voltage categories (basic voltage or low voltage);
- single-voltage or multiple-voltage adaptive EPS.
Wireless chargers and wireless charging pads are subject to specific standby mode power consumption limits.
Interoperability and common charging requirements
The regulation promotes interoperability to reduce the number of chargers and facilitate reuse across devices:
- a large share of AC-DC EPS are required to be interoperable, unless they fall under specific exemptions, like:
- high power or certain voltage levels or voltage/current combinations,
- specific technical, safety or installation constraints,
- use with specific categories of consumer products, like wet-use applications (e.g. toothbrushes) or vacuum cleaners,
- interoperable EPS that include at least one USB Type-C or USB-PD port,
- those that supply their maximum output power through a USB Type-C or USB-PD port,
- those that avoid hard-wired output cables;
- battery chargers for portable batteries of general use and most wireless chargers and charging pads must be powered by interoperable EPS.
Information, marking and consumer transparency
The regulation introduces detailed information requirements to improve transparency and facilitate an informed consumer choice:
- EPS must display technical information on the nameplate, including output power, voltage and current;
- interoperable EPS must:
- display a new and distinctive EU Common Charger logo on the product, packaging, instructions and manufacturer website, which shows the maximum power available at a single USB Type-C port,
- mark each USB Type-C or USB-PD port with its maximum supported power;
- USB Type-C cables must be marked to indicate whether they support 60 W or 240 W;
- detailed product information must be made available in documentation and on a free-access website for at least 10 years.
Conformity assessment and market surveillance
In line with ecodesign and verification rules and principles, the regulation specifies how compliance with the ecodesign requirements must be demonstrated and verified.
Transitional arrangements and repeal of previous rules
The regulation replaces the existing ecodesign regulation for external power supplies while allowing limited transitional arrangements:
- Regulation (EU) 2019/1782 (see summary) is repealed with effect from 14 December 2028;
- spare-part EPS for products placed on the market before that date may continue to comply with the previous rules until 14 December 2033;
- certain high-power USB-PD EPS may comply only with the previous efficiency requirements until 14 December 2030;
- EPS complying early with this regulation, i.e. as of 14 December 2025, may be placed on the market before its general application date.
FROM WHEN DOES THE REGULATION APPLY?
The regulation will apply from 14 December 2028.
BACKGROUND
For further information, see:
MAIN DOCUMENT
Commission Regulation (EU) 2025/2052 of 13 October 2025 laying down ecodesign requirements for external power supplies, wireless chargers, wireless charging pads, battery chargers for portable batteries of general use and USB Type-C cables, pursuant to Directive 2009/125/EC of the European Parliament and of the Council and repealing Commission Regulation (EU) 2019/1782 (OJ L, 2025/2052, 24.11.2025).
RELATED DOCUMENTS
Regulation (EU) 2023/1542 concerning batteries and waste batteries.
Successive amendments to Regulation (EU) 2023/1542 have been incorporated into the original text. This consolidated version is of documentary value only.
Regulation (EU) 2019/1782 on ecodesign requirements for external power supplies.
Directive 2014/53/EU on the harmonisation of the laws of the Member States relating to the making available on the market of radio equipment.
See consolidated version.
Directive 2009/125/EC establishing a framework for the setting of ecodesign requirements for energy-related products.
See consolidated version.